Lab Equipment | Scientific Instruments

Range of Lab Equipment

Output of Pure water	≥ 50 L / hr.
Process	Double Pass RO system
Configuration	Floor Standing

Horizontal Laboratory Autoclave LHA-F15

Capacity	1500 L
Sterilization Temperature	139 °C
Sterilization Pressure	0.25MPa

Portable X-Ray machine LPXM-A10

Input power	Voltage: AC 220 V ± 22 V Frequency: 50/60 Hz ± 1 Hz Power capacity: ≥5 kVA Inner resistance ≤0.5 Ω
Maximum output power	P = 110 kV × 36 mA = 4 kW
Nominal power	100 kV，40 mA，0.1s，4k W

Low speed centrifuge LLS-A41

Max. speed	5000rpm
Max. RCF	3860×g
Max. Capacity	4×500ml

Vis Spectrophotometer LVS-B10

Wavelength Range	325 ~ 1000 nm
Setting Wavelength	Automatic
Spectral Bandwidth	2 nm

Large Scale Vacuum Freeze Dryer LLFD-B11

Drying Chamber

Freeze-drying area	0.32 m²
Layers of shelf	3 + 1
Temperature scope of shelf	-50℃ to +70℃(no-load)
Shelf temperature error	±1℃ (in balance)
Shelf spacing	70 mm
Size of shelf	270 mm × 400 mm

Condenser

Min. Temperature of condenser	≤-70℃ (no-load)
Water-capture capability	＞6 Kg
Liquid material	3L (Thickness: 10 mm）
Defrosting	Electric defrosting
Final Vacuum degree	≤ 5Pa
Style of cooling	Fan cooling

Shelf

Shelf effective area	0.32 m²
Shelf size	270 mm × 400 mm
Shelf numbers	3+1 Top shelf as temperature compensating plate
Material number plate	3 pcs
Shelf spacing	70 mm
Shelf material	AISI 304 stainless steel, Top and bottom plate thickness 5 mm
Shelf temperature range	-50℃ to +70℃ (no-load)

Portable Conductivity Meter LPCM-A11

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 5 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

TDS

TDS range	0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS accuracy	±1 % F.S
TDS factor	0.01 to 1.00 (Default 0.5)
TDS resolution	0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Tube Furnace LTF-A12

Type	Standard
Program memories	2
Heating program	4 step

Multi parameter water quality analyzer LMWA-A11

COD

COD determination range	5 to 5000 mg/ L
COD measurement accuracy	COD < 50 mg/ L, ≤ ± 10 % and COD > 50 mg/ L, ≤ ± 5 %
COD minimum detection limit	0.1 mg/ L
COD measurement time	20 minutes
COD repeatability	≤ ± 5 %
Processing sample number per batch	12 pcs
Consumables for colorimetric COD measurement	Colorimetric tubes and Cuvette
COD reactor digestion temperature	165 ± 0.5°C
COD reactor digestion time	10 min
COD reactor time setting switches	3 pcs
Anti-chlorine interference	(Cl) < 1000 mg/ L No effect

Ammonia nitrogen

Ammonia nitrogen determination range	0.02 to 30 mg/ L
Ammonia nitrogen measurement accuracy	≤ ± 10 %
Ammonia nitrogen minimum detection limit	0.01 mg/ L
Ammonia nitrogen measurement time	10 to 15 minutes
Ammonia nitrogen repeatability	≤ ± 5 %
Processing sample number per batch	20 pcs
Consumables for colorimetric ammonia nitrogen measurement	Colorimetric tubes and Cuvette
Ammonia nitrogen reactor time setting switches	3 pcs

Total phosphorous

Total phosphorous determination range	0.002 to 10 mg/ L
Total phosphorous total phosphorous measurement accuracy	≤ ± 5 %
Total phosphorous minimum detection limit	0.001 mg/ L
Total phosphorous measurement time	35 to 50 minutes
Total phosphorous repeatability	≤ ± 5 %
Processing sample number per batch	12 pcs
Consumables for colorimetric total phosphorous measurement	Colorimetric tubes and Cuvette
Total phosphorous reactor digestion temperature	120 ± 0.5°C
Total phosphorous reactor digestion time	30 min
Total phosphorous reactor time setting switches	3 pcs

Tube Furnace LTF-B14

Type	Standard
Program memories	2
Heating program	4 steps

Drying Oven LDO-A12

Chamber Volume	80 L
Number of Shelves	2
Display Resolution	0.1℃

Air Cooled Chillers LACC-A16

Water tank capacity	500 L
Cooling capacity	69700 W, 238000 BTU / hr
Flow rate	250 - 500 L / Min

Muffle Furnace LMF-H22

Max. Temperature	1550 °C
Capacity	6 L
Heating Program	16 step

Automatic Ubbelohde viscometer LUV-B10

Measuring range	0.35 to 5000 mm²/s
Measure position	2 (4 units measuring position at option)
Oil bath medium

Platelet Incubator LPTI-A11

Temperature range	4°C to 26°C
No. of Platelet agitator	2
Internal dimensions	1117 × 572 × 495 mm

Drying Oven LDO-A14

Chamber Volume	220 L
Number of Shelves	2
Display Resolution	0.1℃

Products by Category

Range of Lab Equipment

Featured Products