| Ion measurement range |
Pb range: 1×108 – 0.1M, 0.2-20700 ppm |
| Ion measurement accuracy |
± 1 % F.S. |
| Resolution |
0.001, 0.01, 0.1, 1 |
| Calibration points |
2 to 5 points |
| Calibration solutions |
0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L |
| mV range |
(-1999.9) to 1999.9 mV |
| mV accuracy |
± 0.2 mV |
| mV resolution |
0.1 mV |
| Temperature measurement range |
0 to 105 °C, 32 to 221 °F |
| Temperature accuracy |
± 0.5 °C, ± 0.9 °F |
| Temperature resolution |
0.1°C |
| Temperature compensation |
0 to 100 °C, 32 to 212 °F |
| Compensation mode |
Manual or automatic |
| Data hold function |
Manual or automatic endpoint detection |
| Reset function |
Yes |
| Stability condition |
Low or high |
| Calibration due |
0 to 31 days |
| Power off |
Manual or automatic (10,20,30 minutes) |
| Memory |
Stores up to 500 sets of data |
| Output |
USB communication interface |
| Connector |
BNC |
| Display |
LCD (130 × 110 mm) |
| Power |
DC 5 V, using AC adapter, AC 220 V / 50 Hz |
| Dimension (L × W × H) |
210 × 188 × 60 mm |
| Weight |
1.5 kg |
- Large LCD display
-
2 - 5 points calibration from low to high concentration
-
Direct ion concentration readout for elaborate measurement process
-
Selectable concentration units from ppm, mg / L, mol / L
-
mV measurements to check the performance of ion selective electrode
-
Temperature compensation provides accurate reading over the entire range
-
Stability indicator to show current measurement status
-
Calibration due reminder for regular calibration of the meter
-
Auto hold function to freeze stable reading for better viewing & recording
-
Automatic electrode diagnosis shows the slope of the sensor
-
Reset setting function
-
Expanded memory stores and recalls up to 500 readings
-
Built –in real time clock stamps
-
USB communication interface to transfer stored data to PC
Benchtop Ion meter is used to measure the lead ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.
Pb Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter
Ion selective electrode: Pb range: 1×108 – 0.1M, 0.2-20700 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor
