Tube Furnace LTF-C20

Tube Furnace LTF-C20


Tube Furnace LTF-C20 is a standard design of tube furnace comprised with 510 mm tube length, 50 mm diameter and 300 mm heat zone with 1300C continuous working temperature. Features software based PID control with 4 lines LCD display, offers 4 steps heating program and 2 preset programs with 1 to 20C/min of thermal rate. Designed ergonomically with dual shell housing, K-type thermocouple and thermal shock resisting tube, it can withstand extreme and rapid changes in temperature. With durable inside lining of light insulating bricks, this tube furnace is with gas inlet and evacuation system option for protective atmosphere, makes it an ideal unit for homogeneous temperature distribution and reliable protective atmosphere.

TypeStandard
Program memories2
Heating program4 steps
Working temperature1300°C
Tube length510 mm
Tube diameter50 mm
Heated zone300 mm
Thermal rate1 to 20°C/min
Homogeneous Hot Zone100 mm at ±10°C
ThermocoupleK-type
Heating elementFe-Cr-Al
Inner insulation materialCeramic-fibre blanket
HousingSteel sheet with epoxy powder coating
Display4 lines
Maximum current7A
Power1350 W
Dimension (W×D×H)484×384×476 mm
Net weight23 kg
Packaging dimension (W×D×H)525×430×635 mm
Gross weight30 kg
  • Standard design of tube furnace design with 510 mm tube length and 50 mm diameter with 300 mm heat zone
  • 1300C continuous working temperature with 1 to 20C/min of thermal rate
  • Steps heating programs with custom preset programs
  • Software based PID control with 4 lines LCD display, offers high precise control
  • Designed ergonomically with dual shell housing, offers low external surface temperature
  • K-type thermocouple and thermal shock resisting tube, offers accurate measurement
  • Durable inside lining of light insulating bricks, can withstand extreme and rapid changes in temperature
  • Gas inlet and evacuation system option for protective atmosphere
  • An ideal unit for homogeneous temperature distribution and reliable protective atmosphere
Tube furnace is used for purification, coating, drying, hardening or ageing of samples, for annealing, brazing, calcination, degassing, sintering, soldering, sublimation, synthesis, and tempering, thermocouple calibration, in the testing of fuel cells, or in catalyst research.