- Analogue display with resolution of 0.5 HR
- Manual loading control
- Rockwell scale HRA, HRB, HRC
- Cone diameter indenter
- Stainless steel weight selection control knob
- Outside body with cast –iron material
- Can be connected to printer
- Easy to operate
Rockwell hardness meter TRHM-A10 is used for the testing of ferrous & non-ferrous materials at Rockwell scale. The high quality stainless steel used in its preparation assures reliability & durability of the hardness tester. With novel appearance its analogue gauge display the hardness indication with good resolution. Equipped with oil pump controls test operations, it reduces operator’s involvement.
| Preliminary test force | 98 N |
| Total test force | 588, 980, 1471 N |
| Total test force dwell time | 0 to 30 S |
| Hardness indication | Analogue display |
| Resolution | 0.5 HR |
| Loading control | Manual |
| Maximum height of specimens | 170 mm |
| Distance from Indenter’s center to outer wall | 165 mm |
| Range of Rockwell hardness value | HRA 20 to 88 HRB 20 to 100 HRC 20 to 70 |
| Dimension of the machine | 510 × 230 × 750 mm |
| Weight | 85 kg |
| Power supply | AC 220 V , 50 Hz |
| Sample (size) length | Diameter ≥30 mm, Thickness ≤ 40 mm |
| Sample width | |
| Measuring range |
| Sample (size) length | Diameter ≥30 mm, Thickness ≤ 40 mm |
| Sample width | |
| Measuring range |
| Sample (size) length | 38×70 mm |
| Sample width | |
| Measuring range | (1-500) mN.m (divided into 7 small ranges) |
| Sample (size) length | 90 to 200 mm |
| Sample width | 15 mm, 25 mm, 50mm |
| Measuring range | 0 to 30, 0 to 100 N,0 to 300 N |
| The maximum temperature | 300°C |
| Temperature fluctuation | Within ± 0.5°C |
| Temperature uniformity | Within ± 1°C |
| Temperature control range | Room temperature to -70 ℃ (room temperature ≤ 25 ℃） |
| Temperature accuracy | ± 0.3 ℃ |
| Impact speed | 0℃ to -30℃ around 2.5 ℃/min -30℃ to -40℃ around 2.5 ℃/min -40℃ to -70℃ around 2.0 ℃/min |
| Mixed capacity | 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg |
| Temperature range | RT to 300°C |
| Temperature control system | PID control |
| Test arm weight | 2.5 N |
| Additional Loads | 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N, |
| Idler | 150 mm |
| Preliminary test force | 98 N |
| Total test force | 588, 980, 1471 N |
| Brinell hardness test |
| Preliminary test force | 98 N |
| Total test force | 588, 980, 1471 N |
| Brinell hardness test | 306, 613, 1839 N |
| Test force | 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N |
| Brinell hardness test | |
| Hardness measuring area |
| Test force | 612.5 N, 980 N, 1225 N |
| Brinell hardness test | 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N |
| Hardness measuring area | 8 to 650 HBW (hard metals steel ball) |
| Measuring range | 0.001 to 9999 |
| Stability | A (absorbency of light) |
| Linearity error |
| Measuring range | 0.001 to 9999 |
| Stability | A (absorbency of light) |
| Linearity error |
| Salinity Measurement range | 0.00 to 19.99 ms/cm |
| Measuring accuracy | EC ± 2% full scale |
| Temperature Measurement range | -5 to 50°C |
Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.
