Radio Frequency Identification Water Purification System LRFW-B11

Radio Frequency Identification Water Purification System LRFW-B11 is a 30 L capacited revolutionary, modular design which helps in elimination of large amount of salts and other minerals from water using 2 stages of RO with the least TOC level i.e. < 3 ppb. Here the concentrate or reject stream is fed into a second RO system to maximize water recovery. The unique feature of this model is that it’s equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance

Buy Now View Catalog
Output of Pure water ≥ 20 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Ultrapure water ≥ 1- 1.5 L / min
Resistivity at 25 °C 18.25 M Ω. cm
Conductivity at 25 °C ≤ 5 µs / cm
TOC < 3 ppb
Pyrogens / Endotoxins < 0.025 EU / ml
Bacteria < 1 cfu / ml
Particles ( > 0.22 µm ) < 1 / ml
Absorbance ( 254 nm ) ≤ 0.001
Reactive Silica ( SiO2 ) < 0.01 ppm
Heavy metal < 0.01 ppm
Electrical requirements 220 V / 50 Hz
Power ≥ 200 W
Dimensions ( L x W x H ) 340 x 550 x 530 mm
Weight 45 kg
  • Radio Frequency Identification Chip integrated
    Advanced Double Pass reverse osmosis system for excellent water quality
    2 levels of water purification with high recovery rate
    Online monitoring of water resistance
    Equipped with 30 L water holding tank
    Least TOC level < 3ppb
    Source of inlet water – Tap water
    Benchtop model
    LCD display to monitor the intake of water pressure and various parameters intuitively
    Programmed water shortage protection alarm
    Anti-fouling RO membrane prevention programme
    Ease of cleansing , disinfecting and draining waste water
    Micro filter membrane to filter out pollutants
    Automatic RO membrane antiscale flushing to extend the life of the RO membrane

Used in PCR / DNA preparation, HPLC, LC-MS, electrophoresis, chemical analysis experiment, protein analysis

{"Output of Pure water":"≥ 20 L \/ hr.","Process":"Double Pass RO system","Configuration":"Benchtop","Water Tank capacity":"30 L","Output of Ultrapure water":"≥ 1- 1.5 L \/ min","Resistivity at 25 \u00b0C":"18.25 M Ω. cm","Conductivity at 25 \u00b0C":"≤ 5 \u00b5s \/ cm","TOC":"< 3 ppb","Pyrogens \/ Endotoxins":"< 0.025 EU \/ ml","Bacteria":"< 1 cfu \/ ml","Particles ( > 0.22 \u00b5m )":"< 1 \/ ml","Absorbance ( 254 nm )":"≤ 0.001","Reactive Silica ( SiO2 )":"< 0.01 ppm","Heavy metal":"< 0.01 ppm","Electrical requirements":"220 V \/ 50 Hz","Power":"≥ 200 W","Dimensions ( L x W x H )":"340 x 550 x 530 mm","Weight":"45 kg"}
Radio Frequency Identification Chip integrated
Advanced Double Pass reverse osmosis system for excellent water quality
2 levels of water purification with high recovery rate
Online monitoring of water resistance
Equipped with 30 L water holding tank
Least TOC level < 3ppb
Source of inlet water – Tap water
Benchtop model
LCD display to monitor the intake of water pressure and various parameters intuitively
Programmed water shortage protection alarm
Anti-fouling RO membrane prevention programme
Ease of cleansing , disinfecting and draining waste water
Micro filter membrane to filter out pollutants
Automatic RO membrane antiscale flushing to extend the life of the RO membrane
Used in PCR / DNA preparation, HPLC, LC-MS, electrophoresis, chemical analysis experiment, protein analysis


Related Products of Radio Frequency Identification Water Purification System

Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier

Radio Frequency Identification Water Purification System LRFW-B13

Radio Frequency Identification Water Purification System LRFW-B13

Output of Pure water : ≥ 40 L / hr.

Process : Double Pass RO system

Configuration : Floor standing

Radio Frequency Identification Water Purification System LRFW-B12

Radio Frequency Identification Water Purification System LRFW-B12

Output of Pure water : ≥ 30 L / hr.

Process : Double Pass RO system

Configuration : Benchtop

Radio Frequency Identification Water Purification System LRFW-B10
Radio Frequency Identification Water Purification System LRFW-B10

Output of Pure water : ≥ 10 L / hr.

Process : Double Pass RO system

Configuration : Benchtop

Radio Frequency Identification Water Purification System LRFW-C10
Radio Frequency Identification Water Purification System LRFW-C10

Feed Water : Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C

Water Production Rate : ≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min

Water Quality (Two Stage) : Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS

Radio Frequency Identification Water Purification System LRFW-A11

Radio Frequency Identification Water Purification System LRFW-A11

Output of Pure water : ≥ 20 L / hr.

Process : Single Pass RO system

Configuration : Benchtop

Radio Frequency Identification Water Purification System LRFW-A14

Radio Frequency Identification Water Purification System LRFW-A14

Output of Pure water : ≥ 50 L / hr.

Process : Single Pass RO system

Configuration : Floor Standing

Radio Frequency Identification Water Purification System LRFW-A10
Radio Frequency Identification Water Purification System LRFW-A10

Output of Pure water : ≥ 10 L / hr.

Process : Single Pass RO system

Configuration : Benchtop

Radio Frequency Identification Water Purification System LRFW-A12
Radio Frequency Identification Water Purification System LRFW-A12

Output of Pure water : ≥ 30 L / hr.

Process : Single Pass RO system

Configuration : Benchtop

Type II Water Purification System

This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances

Type II Water Purification System LTWP-B10

Output of Pure water ≥ 10 L / hr.
Process Double Pass RO system
Water Type Type II

Type II Water Purification System LTWP-B11

Output of Pure water ≥ 20 L / hr.
Process Double Pass RO system
Water Type Type II

Deionized Water System

Deionized Water System LDIN-A10
Output 30 liters/hour
Flow rate Up to 2 liters/minute (with pressure tank)
Pure water outlet 2 reverse osmosis water, deionized water
Deionized Water System LDIN-A20
Output 30 liters/hour
Flow rate Up to 2 liters/minute (with pressure tank)
Pure water outlet 2 reverse osmosis water, deionized water

UV Water Purification System

UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption

UV Water Purification System LUVW-B10

Output of Pure water ≥ 10 L / hr.
Process Double Pass RO system
Configuration Benchtop

UV Water Purification System LUVW-B11

Output of Pure water ≥ 20 L / hr.
Process Double Pass RO system
Configuration Benchtop

Type I and Type III Water Purification System

This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle

Type I and Type III RO Water Purification System LOTW-B10
Output of Pure water ≥ 10 L / hr.
Water Type Type I and Type III
Water Tank capacity 30 L
Type I and Type III RO Water Purification System LOTW-B11
Output of Pure water ≥ 20 L / hr.
Water Type Type I and Type III
Water Tank capacity 30 L

Type III Water Purification System

It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s

Type III Water Purification System LHWP-B11

Output of Pure water ≥ 20 L / hr.
Water Type Type III
Configuration Benchtop

Type III Water Purification System LHWP-B10

Output of Pure water ≥ 10 L / hr.
Water Type Type III
Configuration Benchtop

Talk to us?