+44 2080 043 608

info@labtron.uk

Online Conductivity Controller LOCC-A10

Online Conductivity Controller LOCC-A10

Online Conductivity Controller LOCC-A10 features 3 points conductivity calibration system, TDS measurement mode, and 4 to 20 mA output signal transmitter. The large and clear back light LCD displays Calibration and setup values, Temperature values, ATC (automatic temperature compensation) values, high and low limit of measurement. This controller measures Conductivity and TDS values in µS/ cm, and mS/ cm units.

Buy Now View Catalog
Conductivity measurement range 0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
Conductivity calibration points 1 to 3 points
Conductivity accuracy ±1 % F.S.
Conductivity resolution 0.001/ 0.01/ 0.1/ 1
Conductivity calibration solutions 84 µS/ cm, 1413 µS/ cm, 12.88 mS/ cm,111.8 mS/ cm
TDS measurement range 0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS accuracy ±1 % F.S.
TDS factor 0.1 to 1.0
Temperature measurement range 0 to 100°C, 32 to 212°F
Temperature accuracy 1°C
Temperature resolution 0.1°C
Temperature calibration points 1 point
Temperature calibration range Measured value ± 10°C
Signal output 4 to 200 mA
Load Max. 500 Ω
Low and high alarm limits 0.02 uS/ cm to 20.0 mS/ cm, selectable
Interface RS485
Connection terminals Detachable screw terminals
Temperature compensation Automatic, 0 to 100°C , 32 to 212°F
Cell constant K= 0.1, 1, 10
Environmental conditions Ambient temperature to ≤ 60°C, RH ≤ 80%
Reference temperature 25°C
Display LCD
Power DC 24 V
Dimension (L*W*H) 96 × 96 × 75 mm
Weight 350 g
  • Equipped with industrial conductivity electrode
    1 to 3 conductivity calibration points, 1 temperature calibration point
    Selectable temperature units °C or °F for diff. applications
    System menu allows setting of up to 9 parameters
    Reset features to resumes all setting back to default
    ATC mode for accurate readings over entire range
    Low and high alarm limits set automatically activate an external device
    Manual temperature calibration improves accuracy
Accessories no. Name Qty.
1 Industrial Conductivity electrode 1
2 Conductivity calibration solutions (bottle of 84 µS/ cm, 1413 µS/ cm, 12.88 mS/ cm,111.8 mS/ cm) 1 each
Accessories no. Name Qty.
1 Industrial Conductivity electrode for measuring pure water 1
2 Industrial Conductivity electrode for measuring general liquids 1
3 Industrial Conductivity electrode for measuring high conductivity liquids 1
4 Conductivity calibration solutions (bottle of 84 µS/ cm, 1413 µS/ cm, 12.88 mS/ cm,111.8 mS/ cm) 1 each

Used to measure conductivity and TDS values required for quality checking and research purpose across water treatment plants, filtration units, RO treatment plants, Agriculture industry, Aquaculture industry and others.

{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/ cm, 20.00, 200.0 mS\/ cm","Conductivity calibration points":"1 to 3 points","Conductivity accuracy":"\u00b11 % F.S.","Conductivity resolution":"0.001\/ 0.01\/ 0.1\/ 1","Conductivity calibration solutions":"84 \u00b5S\/ cm, 1413 \u00b5S\/ cm, 12.88 mS\/ cm,111.8 mS\/ cm","TDS measurement range":"0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)","TDS accuracy":"\u00b11 % F.S.","TDS factor":"0.1 to 1.0","Temperature measurement range":"0 to 100\u00b0C, 32 to 212\u00b0F","Temperature accuracy":"1\u00b0C","Temperature resolution":"0.1\u00b0C","Temperature calibration points":"1 point","Temperature calibration range":"Measured value \u00b1 10\u00b0C","Signal output":"4 to 200 mA","Load":"Max. 500 \u03a9","Low and high alarm limits":"0.02 uS\/ cm to 20.0 mS\/ cm, selectable","Interface":"RS485","Connection terminals":"Detachable screw terminals","Temperature compensation":"Automatic, 0 to 100\u00b0C , 32 to 212\u00b0F","Cell constant":"K= 0.1, 1, 10","Environmental conditions":"Ambient temperature to \u2264 60\u00b0C, RH \u2264 80%","Reference temperature":"25\u00b0C","Display":"LCD","Power":"DC 24 V","Dimension (L*W*H)":"96 \u00d7 96 \u00d7 75 mm","Weight":"350 g"}
Equipped with industrial conductivity electrode
1 to 3 conductivity calibration points, 1 temperature calibration point
Selectable temperature units °C or °F for diff. applications
System menu allows setting of up to 9 parameters
Reset features to resumes all setting back to default
ATC mode for accurate readings over entire range
Low and high alarm limits set automatically activate an external device
Manual temperature calibration improves accuracy
Used to measure conductivity and TDS values required for quality checking and research purpose across water treatment plants, filtration units, RO treatment plants, Agriculture industry, Aquaculture industry and others.


Benchtop Conductivity Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

image-name

Benchtop Conductivity Meter LBCM-A13
Conductivity measurement range 0.000 μS/cm to 3000mS/cm
Resistivity measurement range 5.00 Ω·cm to 100.0 MΩ·cm
TDS measurement range 0.000 mg/L to 1000g/L
image-name

Benchtop conductivity meter LBCM-A11
Conductivity measurement range 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm
Conductivity accuracy ± 1 % F.S.
Conductivity resolution 0.01, 0.1, 1

Benchtop Multi-parameter Water Quality Meter

image-name
Benchtop Multi-parameter Water Quality Meter LMPWM-A31
pH Mode
pH range -2.00 to 20.00 pH
pH Accuracy ± 0.002 pH
pH Resolution 0.1/0.01/0.001 pH, selectable
pH Calibration Points 1 to 5 Points
pH Buffer Solutions USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers
mV Mode
mV Range -1999.9 to 1999.9 mV
mV Accuracy ± 0.2 mV
mV Resolution 0.1/1 mV, selectable
mV Calibration Points 1 Point
Conductivity Mode
Conductivity Range 0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy ± 0.5% F.S.
Conductivity Resolution 0.01/0.1/1
Conductivity Calibration Points 1 to 5 Points
Conductivity Solutions 10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient 0.0 to 10.0 %/°C
Compensation mode Linear or Pure Water
Cell Constant K=0.1, 1, 10 or Custom
Reference temperature 20 or 25°C
image-name
Benchtop Multi-parameter Water Quality Meter LMPWM-A30
pH Mode
pH range -2.00 to 20.00 pH
pH Accuracy ± 0.002 pH
pH Resolution 0.1/0.01/0.001 pH, selectable
pH Calibration Points 1 to 5 Points
pH Buffer Solutions USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers
mV Mode
mV Range -1999.9 to 1999.9 mV
mV Accuracy ± 0.2 mV
mV Resolution 0.1/1 mV, selectable
mV Calibration Points 1 Point
Conductivity Mode
Conductivity Range 0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy ± 0.5% F.S.
Conductivity Resolution 0.01/0.1/1
Conductivity Calibration Points 1 to 5 Points
Conductivity Solutions 10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient 0.0 to 10.0 %/°C
Compensation mode Linear or Pure Water
Cell Constant K=0.1, 1, 10 or Custom
Reference temperature 20 or 25°C

Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

image-name

Benchtop Ion meter for Cl, LBIM-A10
Ion measurement range Cl range: 5 × 106 - 1 M, 1.8 - 35500 ppm
Ion measurement accuracy ± 0.5 % F.S.
Resolution 0.001, 0.01, 0.1, 1
image-name

Benchtop Ion meter for F, LBIM-A11
Ion measurement range F range: 1 × 106M – saturation, 0.02 ppm to saturation
Ion measurement accuracy ± 0.5 % F.S.
Resolution 0.001, 0.01, 0.1, 1

Benchtop Water Hardness Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

image-name
Benchtop Water hardness meter LBWM-A10
Water hardness range 0.05 mmol / L -0.2 mol / L
(CaCO3) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L
(German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f
Accuracy ± 1 % F.S.
Calibration points 2 to 5 points

Benchtop Dissolved Oxygen Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

image-name
Benchtop Dissolved oxygen meter LBDO-A10
Dissolved oxygen range 0.0 to 20.0 mg / L (or ppm)
Dissolved oxygen accuracy ± 0.5 mg / L
Resolution 0.1 mg / L
image-name

Benchtop Dissolved oxygen meter LBDO-A11
Dissolved oxygen range 0.0 to 20.0 mg / L (or ppm)
Dissolved oxygen accuracy ± 0.2 mg / L
Resolution 0.01 mg / L

Talk to us?