Pocket ORP tester LPOT-A10 is easy to use ORP meter equipped with a platinum sensor. It is suitable for measuring the oxidation reduction potential of liquids. The relative & absolute mV measurement modes are possible with this pocket ORP meter.
Buy Now View Catalog| Sensor type | Platinum sensor |
| Connector | 6 pin |
| ORP measurement range | (-999) to 999 mV |
| ORP accuracy | ± 2 mV |
| ORP resolution | 1 mV |
| ORP calibration solutions | mV & relative mV |
| ORP calibration points | 1 point (only for relative mV mode) |
| Data hold function | Manual or automatic endpoint detection |
| Reset function | Yes |
| Display | LCD screen |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| Power | 2 × 1.5V “AAA” batteries |
| Battery life | 200 hours |
| Dimension (L*dia.) | 175 × 40 mm |
| Weight | 100 g |
Pocket ORP tester can be used for measurement of chromate reduction, cyanide oxidation, redox & oxidation reaction content in swimming pool water, aquaculture industry and drinking water.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Connector : BNC
ORP measurement range : (-999) to 999 mV
ORP accuracy : ± 2 mV
| pH Mode |
|
||||||||||||||||||
| mV Mode |
|
||||||||||||||||||
| Conductivity Mode |
|
| pH Mode |
|
||||||||||||||||||
| mV Mode |
|
||||||||||||||||||
| Conductivity Mode |
|
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Ion measurement range | F range: 1 × 106M – saturation, 0.02 ppm to saturation |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Ion measurement range | Cl range: 5 × 106 - 1 M, 1.8 - 35500 ppm |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Conductivity measurement range | 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity resolution | 0.01, 0.1, 1 |
| Conductivity measurement range | 0.000 μS/cm to 3000mS/cm |
| Resistivity measurement range | 5.00 Ω·cm to 100.0 MΩ·cm |
| TDS measurement range | 0.000 mg/L to 1000g/L |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Water hardness range |
0.05 mmol / L -0.2 mol / L (CaCO3) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L (German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f |
| Accuracy | ± 1 % F.S. |
| Calibration points | 2 to 5 points |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.2 mg / L |
| Resolution | 0.01 mg / L |
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.5 mg / L |
| Resolution | 0.1 mg / L |
Talk to us?
