Portable 10 in 1 Multi Gas Detector LMGD-A10 is simultaneous detector of 10 gases namely O2, CH4, CO2, VOC, CO, H2S, SO2, CL2, NO2, NH3. It display multiple display modes selectable, multi-channel data mode, multi-curve mode, multi-channel data + multi- curve mode and single channel + single curve mode. Designed with 3.5-inch high-definition color screen, high resolution, wide viewing angle. The air supply system of up to three pumps can switch the pump arbitrarily, blocking the loss of the cross-gas to the relevant sensor and prolonging the service life of the sensor. It support gas concentration data display, gas concentration real-time curve display mode arbitrary switching.
Buy Now View CatalogGas Detected | O2 CH4 CO2 VOC CO H2S SO2 CL2 NO2 NH3 |
Detection principle | Electrochemical principle (O2 CO H2S SO2 CL2 NO2 NH3) Infrared principle (CH4 CO) Photoionization principles (VOC) |
Measurement Range | O2: 0-30% VOL, CH4: 0-50000 PPM, CO2:0-50000 PPM VOC:0-2000 PPM, CO:0-999 PPM, H2S: 0-200 PPM SO2: 0-25 PPM, CL2: 0-50 PPM, NO2: 0-100 PPM, NH3:0-100 PPM |
Resolution | O2: 0.01% VOL, CH4: 1 PPM, CO2:1 PPM VOC:1 PPM, CO:0.1 PPM, H2S: 0.1 PPM SO2: 0.01 PPM, CL2: 0.01 PPM, NO2: 0.01 PPM, NH3:0.01 PPM |
Concentration unit | ppm, mg/m3, %VOL, %LEL, can be switched by one button and the concentration value is automatically converted by the internal system |
Precision | 2% FS |
Response Time | ≤ 10S |
Repeatability | ≤ ± 1% |
Zero shift | ≤ ± 1% (F.S / Year) |
Sampling method | Built-in stable flow pump, each flow pump is equipped in each independent module, pump flow is adjustable in ten steps, flow range: 0-800 mL/Min |
Modular structure | 3 detection modules, each module can be selected to detect up to 6 kinds of gases, and a total of 18 kinds of gases can be selected |
Display | 3.5 inch colour display, resolution 320×480 |
Display content | Gas formula, concentration data, unit of measure, gas curve trend, battery level, time, temperature, humidity, pressure (optional), pump status, wireless status, printer status, screen capture status |
Display mode | Multiple display modes selectable, multi-channel data mode, multi-curve mode, multi-channel data + multi-curve mode, single channel + single curve mode |
Temperature Humidity display range | Temperature: -20°C- 50 °C, resolution: 0.1 °C humidity: 0-99% RH, resolution: 1% RH (optional) |
Data storage | Standard 8G SD card storage function (more capacity can be customized), storage interval can be set by itself, can achieve local storage, view, delete historical data and alarm records, can be directly connected to the computer through USB, quickly download stored data , TXT document; with PC software to download, store, analyze, print data |
Communication | Output RS232, RS485 signal; with PC software to download, store, analyze, print data (optional) |
Wireless transmission | Bluetooth (with printer), ZigBee, built-in DTU wireless module (optional) |
Printing | Built-in printer or external Bluetooth printer (optional), Print Content: Text, graphics, 1D code, 2D code, curve |
Screen capture settings | The content displayed by the current host saved in the form of a BMP picture, and then the picture exported to the computer through the USB cable for the user to record and reference |
Battery capacity | 3.7 VDC, 10000 mA rechargeable polymer battery with overcharge, over discharge, over voltage, short circuit protection |
Charging interface | Micro-USB charging interface is designed to be charged anytime, anywhere with common data lines and mobile power |
Operating temperature | -0°C-70°C (optional flue gas sampling probe, up to 1200°C smoke concentration) |
Working humidity | 0-95% RH (no condensation) (high humidity can be selected with filter drying device) |
Explosion-Proof | Exic II CT3 Gc |
Alarm mode | Buzzer, red LED and alarm status prompt on the display, fault alarm, pump abnormal alarm, battery low battery alarm, shutdown alarm, fall alarm (optional) |
Dimension | 260×230×120 mm |
Recovery Time | ≤ 10S |
Linearity error | ≤ ± 1% |
Degree of protection | IP66 |
Weight | 3700 g |
Accessories no. | Name |
---|---|
1 | Charger |
2 | Carrying case |
3 | Soot filter water vapour |
4 | Air sampling rod |
5 | Tube 600 mm |
Portable 10 in 1 Multi Gas Detector is used in pharmaceutical, medical, food, corrosion, Disinfection, chemical fertilizers, resins, adhesives and across pesticides, raw materials, samples, process and breeding plants, waste treatment plants, perm places
Measurement principle : Non-dispersive infrared (NDIR)
Gas Detected : SF6: 0 to 50 ppm range/ 0 to 1000 ppm range (as per req.)
Detection Uncertainty : <1.5 % F.S
Sampling method : Diffusion
Sensor type : CO2: solid electrolyte sensor, O2:electrochemical sensor
Detection range : CO2:0.04 to 5.00 % and O2:0.0 to 30.0 %
Sampling : With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection
Gas : Ethylene C2H4
Measure Range : 0 to 1000 ppm
Gas detected : NO2
Detection principle : Electrochemistry
Sampling method : Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection.
Sampling Method : Diffusion
Working conditions :
Temperature | -20 to 50°C |
Pressure | 0.9 to 1.1 (standard atmospheric pressure) |
Humidity | 10 to 95 % RH (no dew condensation) |
Explosion proof grade : Exia II CT3
Gas detected : Sulfur dioxide SO2
Detection principle : Electrochemistry
Sampling method : Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection.
Gas Detected : Nitrogen N2
Detection principle : Electrochemistry
Measurement Range : 0 to 100 % VOL
Sampling method : Diffusion
Measurement principle : Electrochemical (oxygen, toxic gases), Catalytic combustion (flammable gases), Infrared principle (carbon dioxide gas)
Detector gas : Flammable gases, oxygen gas, toxic and harmful gases
Ozone measurement range | 0 ppm ∼ 5 ppm, 0 ppm ∼ 100 ppm, 0 ppm ∼ 300 ppm, 0 ppm ∼ 600 ppm ( Optional ) |
Flow rate | 1.5 L/min |
Accuracy | 0.01 ppm or 3 % of reading |
Measurement range | 0 ppm ∼ 5 ppm |
Resolution | 0.001 ppm ( 0 ppm ∼ 5 ppm ) |
Temperature range | ˗ 40 °C ∼ 120 °C |
Measuring range | 0 ∼ 125 Pa |
Accuracy |
0 ± 0.2 Pa (liner error) ± 1 % |
Operating temperature range | 0 °C ∼ 50 °C |
Measuring range | ± 500 Pa |
Repeatability | ± 0.2 % FS |
Resolution | 0.1 Pa |
Ozone measurement range | 0 ppm ∼ 100 ppm/ 0 ppm ∼ 1000 ppm |
Flow rate | 1 L/min |
Accuracy | 0.01 ppm |
Capacity | 50 kg |
Accuracy | 1 g |
Speed | 1 s |
Temperature Measurement Range | -10℃ to 60℃ |
Temperature Resolution | 0.1°C |
Temperature Accuracy | ± 1.5℃ |
Talk to us?