Ion measurement range	Cn range: 5 × 10⁶ – 0.01 M, 0.2 – 260 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Large LCD display
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC

Cn Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter

Ion selective electrode: Cn range: 0.2 – 260 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor

Benchtop Ion meter is used to measure the cyanide ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

{"Ion measurement range":"Cn range: 5 \u00d7 10^{6<\/sup> \u2013 0.01 M, 0.2 \u2013 260 ppm","Ion measurement accuracy":"\u00b1 1 % F.S.","Resolution":"0.001, 0.01, 0.1, 1","Calibration points":"2 to 5 points","Calibration solutions":"0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol \/ L, mg \/ L","mV range":"(-1999.9) to 1999.9 mV","mV accuracy":"\u00b1 0.2 mV","mV resolution":"0.1 mV","Temperature measurement range":"0 to 105 \u00b0C, 32 to 221 \u00b0F","Temperature accuracy":"\u00b1 0.5 \u00b0C, \u00b1 0.9 \u00b0F","Temperature resolution":"0.1\u00b0C","Temperature compensation":"0 to 100 \u00b0C, 32 to 212 \u00b0F","Compensation mode":"Manual or automatic","Data hold function":"Manual or automatic endpoint detection","Reset function":"Yes","Stability condition":"Low or high","Calibration due":"0 to 31 days","Power off":"Manual or automatic (10,20,30 minutes)","Memory":"Stores up to 500 sets of data","Output":"USB communication interface","Connector":"BNC","Display":"LCD (130 \u00d7 110 mm)","Power":"DC 5 V, using AC adapter, AC 220 V \/ 50 Hz","Dimension (L \u00d7 W \u00d7 H)":"210 \u00d7 188 \u00d7 60 mm","Weight":"1.5 kg"}}

Large LCD display
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC

Benchtop Ion meter is used to measure the cyanide ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Related Products of Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.