Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12

Labtron LLTT-A12 is designed with cold filter plugging point test along with proper cooling bath. Equipped as per “Test Methods for Cold Filter Plugging Point of Distillate Fuels”.

Buy Now View Catalog
Measurement range
Temperature controlling accuracy
Refrigeration system
Bath stirrer
Sample stirrer
Cold trough
Controlling temperature of cold trough
Constant temperature bath Cubage
Constant temperature bath Types
Temperature Range
Temperature sensor
Stirring motor Power
Stirring motor Speed
Ambient temperature (-10)℃ ~ 35 ℃
Relative humidity ≤ 85 %
Refrigeration speed
Repeatability for solidifying point
Repeatability for pour point
Reproducibility
Pressure of cooling water
The lowest temperature
Sample cup Inner diameter 31.0 ~ 32.0 mm
Sample cup Wall thickness 1.0 ~ 1.5 mm
Sample cup Height 115 ~ 125 mm
Pumping pressure U type differential pressure meter 1961 Pa (200 mm H2O)
Dimensions
Inner Dimensions
Outer Dimensions
Total power consumption ≤ 150 W
Heating power
Power supply AC 220 V ± 10 %, 50 Hz
  • Relative low temperature tester Round glass cup with flat bottom sample cup Equipped with SH/T0248 “Test Methods for Cold Filter Plugging Point of Distillate Fuels Advance Digital display Integrated structure

It can be widely used in petroleum, chemical industries and environmental studies.

{"Measurement range":"","Temperature controlling accuracy":"","Refrigeration system":"","Bath stirrer":"","Sample stirrer":"","Cold trough":"","Controlling temperature of cold trough":"","Constant temperature bath Cubage":"","Constant temperature bath Types":"","Temperature Range":"","Temperature sensor":"","Stirring motor Power":"","Stirring motor Speed":"","Ambient temperature":"(-10)\u2103 ~ 35 \u2103","Relative humidity":"\u2264 85 %","Refrigeration speed":"","Repeatability for solidifying point":"","Repeatability for pour point":"","Reproducibility":"","Pressure of cooling water":"","The lowest temperature":"","Sample cup Inner diameter":"31.0 ~ 32.0 mm","Sample cup Wall thickness":"1.0 ~ 1.5 mm","Sample cup Height":"115 ~ 125 mm","Pumping pressure":"U type differential pressure meter 1961 Pa (200 mm H2<\/sub>O)","Dimensions":"","Inner Dimensions":"","Outer Dimensions":"","Total power consumption":"\u2264 150 W","Heating power":"","Power supply":"AC 220 V \u00b1 10 %, 50 Hz"}
Relative low temperature tester Round glass cup with flat bottom sample cup Equipped with SH/T0248 “Test Methods for Cold Filter Plugging Point of Distillate Fuels Advance Digital display Integrated structure
It can be widely used in petroleum, chemical industries and environmental studies.


Related Products of Low Temperature Tester

Solidifying Point Constant Temperature Water Bath LLTT-A10

Solidifying Point Constant Temperature Water Bath LLTT-A10

Capacity : 20 L

Temperature range : Ambient +5°C to 100°C

Precision : ± 0.1℃

Solidifying Point Tester (Solidifying Point and Cold Filter Plugging Point) LLTT-A21

Solidifying Point Tester (Solidifying Point and Cold Filter Plugging Point) LLTT-A21

Refrigeration system : New-type refrigeration compressor

Cold trough : One trough with two baths, temperatures in two baths are equal

Controlling temperature of cold trough : Room temperature ~ (-70) °C

Solidifying Point Tester LLTT-A13
Solidifying Point Tester LLTT-A13

Temperature controlling accuracy : ± 0.5 ℃

Refrigeration system : New-type refrigeration compressor

Cold trough : Two holes in one trough, and same temperature

Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15
Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15

Refrigeration system : New-type refrigeration compressor

Controlling temperature of cold trough : Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C

Ambient temperature : ≤ 30 ℃

Solidifying Point Tester ('-20°C +80°C') LLTT-A22

Solidifying Point Tester ('-20°C +80°C') LLTT-A22

Temperature controlling accuracy : ± 0.5 °C

Refrigeration system : New-type refrigeration compressor

Cold trough : One trough with two baths, temperatures in two baths are equal

Automatic Pour Point Tester LLTT-A23

Automatic Pour Point Tester LLTT-A23

Ambient temperature : ≤ 30 ℃

Refrigeration speed : > 40 °C / 10 min

Repeatability for solidifying point : ≤ 2 °C

Pour and Cloud Point Tester LLTT-A14
Pour and Cloud Point Tester LLTT-A14

Chamber quantity : 2 chambers

Chamber 01 temperature control : Ambient to -51 ℃

Chamber 02 temperature control : Ambient to -65 ℃

Solidifying Point Tester LLTT-A20
Solidifying Point Tester LLTT-A20

Temperature controlling accuracy : ± 0.5 °C

Refrigeration system : New-type refrigeration compressor

Cold trough : One trough with two baths, temperatures in two baths are equal

Acid and Alkali Tester

Acid Number and Acidity Tester LAAT-A11

Ambient temperature ≤ 35 °C
Relative humidity ≤ 85 %
Precision of titration tube Scale division is 0.02 ml

Water Soluble Acid and Alkali Tester LAAT-A10

Graduated flask 100 ml,50 ml
Conical flask 100ml
Separatory funnel 250ml

Ash Content Tester

Ash Content Tester LACT-A10
Electric Muffle Furnace
Controlled temperature 775 ±25 ℃
Temperature rising time of empty chamber ≤ 50 min
Furnace temperature uniformity ≤ 15℃
Internal dimension 200 × 120 × 80 mm
External dimension 490 × 490 × 450 mm
Power consumption 2.5 kW
Power supply AC 220V ±10%, 50 Hz
Net weight 35 kg
Temperature controller
Maximum control temperature 1200 ℃
Dimension 500 × 300 × 235 mm
Power consumption 5000 W
Power supply AC 220±10% V, 50Hz
Net weight 5 kg
Electric heating plate
Heating power (1 to 6) grades, continuously adjustable
Temperature 400℃
Diameter of heating plate Φ 180 mm
Dimension 280 × 250 × 90 mm
Power consumption 2000 W
Power supply AC 220±10%V, 50Hz

Aniline Test Equipment

Aniline Point Tester LAPT-A11
Temperature controlling accuracy ≤ 0.5 ℃
Temperature controlling range Room temperature ~ 200 ℃
Power supply for illumination 5 V

Aniline Point Tester LAPT-A10

Measurement range Room temperature ~ 150°C
Stirring speed 0 ~ 1200 r / min
Heating power 25 W

Automatic Dielectric Tester

Automatic Dielectric Tester LADT-A10

Capacity 2.0 kVA
Speed of voltage increase 2 k V/ s
Voltage inspection accuracy 0.01

Automatic Bomb Calorimeter

Automatic Bomb Calorimeter LABC-A10
Calorimeter type Isoperibol
Temperature range 5 to 40°C
Measurement range 5 to 40 MJ/ kg
Automatic Bomb Calorimeter LABC-A11
Calorimeter type Isoperibol
Temperature range 5 to 40°C
Measurement range 5 to 40 MJ/ kg

Talk to us?